How to Remove Dents From Stainless Steel Fridge
Stainless steel fridges are the most common choice for people looking to give their kitchen a sleek and stylish look. However, that sleek look can easily be ruined when the fridge gets dents. No matter how much we try, we end up having at least a single dent on the fridge. And that is when people start looking for ways on how to remove dents from stainless steel fridge.
Although stainless steel appliances have longer durability as compared to other types of materials, they are more prone to dents. That is why even the slightest mishap can cause a noticeable dent and marks on the fridge. But not to worry much, with proper techniques and safe DIY methods, you can easily get rid of the dents on the stainless steel fridge.
In the guide, we will see the easy home remedies for how to remove dents from stainless steel fridge, what precautions to take while treating the dents, and when to seek professional help for removing dents.
How to Remove Dents From Stainless Steel Fridge
Here are the 5 most commonly used DIY methods with proper steps to get the dents out of a stainless steel refrigerator. Let’s have a look at these methods:
Method 1: Hair Dryer and Air Duster
The first and most easy method in how to remove dents from stainless steel fridge is the use of a hair dryer and an air duster. A hair dryer might sound odd to you, but it actually works well for small to medium-sized dents.
Things Needed
- Air Dryer
- Air Duster
Steps
- Take the hair dryer and plug it into the electric supply.
- Heat the dented area with a hair dryer on high setting for about 3-4 minutes.
- Then take the air duster and spray it directly on the dented area; it will release freezing cold air.
- Wait for 1-2 minutes, and you will see that the dent pops out because of the rapid temperature changes.
Method 2: Hot Water and Plunger
The second DIY method in how to remove dents from stainless steel fridge is the use of hot water and a plunger. It is another easy DIY method that you can try for large dents.
Things Needed
- Hot Water
- Plunger
Steps
- Heat the water and pour it over the dent. Hot water will make the surface more flexible, which causes the dent to pop out.
- Then take a plunger and pull the dent outward. Apply a steady suction to the surface outward.
Remember to only use hot water, not boiling water.
Method 3: Dry Ice
Dry ice is one of the most common methods used to get rid of dents on stainless steel appliances. The extremely cold temperature of dry ice causes the metal to contract, and the dent pops out.
Things Needed
- Dry Ice
- Clean Cloth
Steps
- Rub the dry ice over the dents for a few minutes until you hear a popping sound. The pop sound means that the dent has been fixed.
- Then take a clean cloth and wipe that area.
Always wear insulated gloves and safety glasses when using dry ice.
Method 4: Suction Cup
Another effective method in how to remove dents from stainless steel fridge is the use of suction cups.
Things Needed
- Suction Cup
Steps
- Stick the suction cup on the dented area, try to attach it to the center of the dent so that the whole dent can be covered.
- Wait for 1-2 minutes.
- Then pull the suction cup gently with light hands to avoid damaging the fridge.
- Repeat this process until you see that the dent has been completely removed.
- If you have a large-sized suction cup, then 1 time would do, but if you have a small suction cup, then you might have to repeat the process several times by changing its position.
Method 5: Hot Melt Glue
Hot glue is very effective in getting rid of deep dents.
Things Needed
- Hot Glue
- Pulling Tool/Tension Rod
- Clean Cloth
- Ice
Steps
- Apply the hot glue to the pulling tool/ tension rod and stick to it the center of the dented area.
- Leave it for a few minutes so that the glue cools down.
- Then pull the tool/rod with light hands.
- Repeat this process until the dent has been removed completely.
- Remove the glue residue with a clean cloth or you can also use ice to remove the
Precautions to Take When Removing Dents
Now that you know the DIY methods for how to remove dents from stainless steel fridge, you should all know the necessary precautions when dealing with these dents.
- When using any electrical tool like a hot glue gun or hair dryer, make sure you unplug the refrigerator to prevent any electrical hazards.
- Avoid using sharp tools like knives, etc, as they create scratches which are not easy to remove.
- When trying any of the above methods, first test it on a small area to check if it causes discoloration to the refrigerator or creates any marks.
When to Seek Professional Help
Along with the precautions, you should also know when to seek professional help for your refrigerator . If the dents of the fridge are very deep, have been there for a longer time, and there are scratches along with the dents then home remedies might not be very effective, so in that case it’s best to call a professional.
It’s common to get dents on a stainless steel fridge; however, these dents don’t always require costly repair. With easy DIY methods, you can easily get rid of the dents. These methods, when followed with pepper steps, will surely help in removing dents from your fridge. Always first try the DIY methods first, but if those don’t work for you, then seek professional help.
So now maintaining the flawless, sleek look of your stainless steel refrigerator is no longer difficult when you have this easy guide on how to remove dents from stainless steel fridge.
Read Also: How to Clean Oven With Baking Soda?
FAQ
How to pull dents out of the fridge?
To pull the small dents out of a fridge use simple DIY methods e.g, applying heat (hair dryer) followed by cold (compressed air/ice), or using a suction cup. For deeper or stubborn dents, it’s best to contact a professional refrigerator repair service.
How to remove a small dent from the refrigerator door?
To remove a small dent from a refrigerator door use a hair dryer to heat the dent and then quickly cool it with air duster or ice. The rapid temperature change makes the metal pop back into place. For shallow dents, a suction cup can also work.
Do dents in a stainless steel fridge affect its performance?
No, dents in a stainless steel fridge usually do not impact the cooling or overall performance of the appliance. However, they can affect the appearance, and in cases where the surface is scratched along with the dent, it may become more difficult to restore the original finish.